RUGGEDCOM i800
Installation Guide
Certification
The RUGGEDCOM i800 device has been thoroughly tested to guarantee its conformance with recognized
standards and has received approval from recognized regulatory agencies.
CONTENTS
•
Section 6.1, "Approvals"
•
Section 6.2, "EMC and Environmental Type Tests"
Section 6.1
Approvals
This section details the standards to which the RUGGEDCOM i800 complies.
CONTENTS
•
Section 6.1.1, "CSA"
•
Section 6.1.2, "ATEX/IEC Ex"
•
Section 6.1.3, "European Union (EU)"
•
Section 6.1.4, "FCC"
•
Section 6.1.5, "FDA/CDRH"
•
Section 6.1.6, "ISED"
•
Section 6.1.7, "ACMA"
•
Section 6.1.8, "RoHS"
•
Section 6.1.9, "ISO"
•
Section 6.1.10, "Other Approvals"
Section 6.1.1
CSA
This device meets the requirements of the following Canadian Standards Association (CSA) standards under
certificates 2058468 (general safety) and 2068170 (hazardous locations):
• CAN/CSA-C22.2 No. 60950-1-03
Information Technology Equipment – Safety – Part 1: General Requirements
• CAN/CSA-C22.2 No. 0-M91
General Requirements - Canadian Electrical Code, Part II
Approvals
Chapter 6
Certification
19