Assembling The Rear Wheel - Yamaha YZ 2015 Series Owner's Service Manual

2. Replace:
• Rear wheel sprocket
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the self-locking nuts and the rear
wheel sprocket.
b. Clean the rear wheel drive hub with a clean
cloth, especially the surfaces that contact
the sprocket.
c. Install the new rear wheel sprocket.
Rear wheel sprocket self-locking
nut
50 Nm (5.0 m·kgf, 36 ft·lbf)
TIP
Tighten the self-locking nuts in stages and in a
crisscross pattern.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲

ASSEMBLING THE REAR WHEEL

EASB291141
1. Install:
• Bearing (right side) "1"
• Circlip "2"
New
• Spacer "3"
• Bearing (left side) "4"
• Oil seals "5"
New
TIP
• Apply the lithium-soap-based grease to the
bearing and the oil seal lip when installing.
• Install the bearing with seal facing outward.
• Right side of bearing shall be installed first.
• Install the oil seal with its manufacture's
marks or numbers facing outward.
ECA
NOTICE
Install the bearing by pressing its outer race
parallel.
5 2
1
LS
TIP
Use a socket "1" that matches the diameter of
the bearing outer race and that of the oil seal.
2. Install:
• Brake disc "1"
• Brake disc bolt "2"
Brake disc bolt
14 Nm (1.4 m·kgf, 10 ft·lbf)
LOCTITE®
TIP
Tighten the bolts in stages and in a crisscross
pattern.
4-9
REAR WHEEL
LS
5
3
4
1