Energy Efficiency - AEG BEB351010M User Manual

30 www.aeg.com
Problem
You want to activate the
True Fan Cooking function,
but the indicator of the Plus
Steam button is on.
The water in the cavity em-
bossment does not boil.
The water comes out of the
cavity embossment.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. ENERGY EFFICIENCY

12.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conven-
tional mode
Energy consumption with a standard load, fan-forced
mode
Possible cause
The True Fan Cooking PLUS
function operates.
The temperature is too low.
There is too much water in
the cavity embossment.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
Push the Plus Steam button
to stop the True Fan
Cooking PLUS function.
Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re-
fer to the specific procedure.
AEG
BEB351010M
103.5
A
0.99 kWh/cycle
0.88 kWh/cycle