SMC Networks ZSE20AF X576 Series Operation Manual page 75

Error Error displayed
Copy error
1: The switch output will be OFF when an error is generated.
An error is output when the error output is set (in the product with error output function).
2: When the set output is an over current error when the error output is set, the switch output is OFF.
If the error cannot be reset after the above measures are taken, or errors other than above are displayed,
please contact SMC.
Setting of the error output
In reversed output mode, error [Er0], [Er4], [Er7] and [Er40] can be detected.
Normal output
Description
Copy function is operated
incorrectly.
1
-74-
Measures
Press the
buttons simultaneously
for 1 second or longer to
clear the error. Then
check the wiring and
model before copying
again.
Reversed output
Error output
and
Not applicable
No.PS※※-OMX1005