SMC Networks ZSE20AF X576 Series Operation Manual page 57

Copy ready status
Press the button to start copying.
The copy source pressure switch
Sending/
Receiving
Copy
completed
(Master side)
Press the
button.
The copy can be made continuously
and the copy ready status can be
held even if the power supply is
turned off.
To complete the copy function,
press the and
simultaneously for 1 second or
longer.
[F97] Selection of copy function completed
: When the copy destination pressure switch displays [Er13], it indicates a sending and receiving error of the copy function.
Press the and buttons simultaneously for 1 second or longer to return to measurement mode. Then, check
the wiring and specifications of the switch and retry the copy function.
Even though the power supply is turned OFF, the
copy ready status will be retained.
Main display: Red
Main display: Red
buttons
-56-
The copy destination pressure switch
•When completed
normally
•When error
occurs
(Master side)
Press the and
buttons
simultaneously for
1 second or longer.
Measurement mode
Main display:
Green
Main display:
Green
Main display: Red
(Slave side)
When
completed
normally.
Press the
button.
No.PS※※-OMX1005