Basic Call Features - Yealink Teams T58A Quick Start Manual

2. Tap the presence status field to select a desired status.

Basic Call Features

To place a call:
1. Tap on the Calls screen.
2. Enter the account information of the contact to search and then select the desired contact.
3. Tap at the top-left corner of the touch screen.
You can pick up the handset, press
To answer a call:
1. Do one of the following:
- Pick up the handset. The call is answered in handset mode.
- Press . The call is answered in hands-free (speakerphone) mode.
- Press . The call is answered in headset mode.
- Tap on the touch screen.
To end a call:
1. Do one of the following:
- If you are using the handset, hang up the handset or tap
- If you are using the speakerphone, press
- If you are using the headset, press
To redial a call:
1. Press when the phone is idle to dial out the last dialed number.
To mute or un-mute a call:
1. Press or tap
a call.
To place a call on hold:
1. Press or tap
To resume the held call:
or tap Resume.
1. Press
Initiate a Conference Call
You can initiate a conference call by calling multiple contacts or by inviting other contacts.
To initiating a conference by calling multiple contacts:
1. Tap on the touch screen.
2. Enter the account information of the participant to search and then select the desired contact.
You can add multiple contacts.
3. Tap at the top-left corner of the touch screen.
To initiate a conference call by inviting other contacts:
1. During a call, tap
2. Tap at the bottom-right corner.
3. Enter the account information of the participant to search and then add members.
4. Tap to initiate a conference.
Call Forward
You can enable the call forward feature to forward all incoming calls to the desired destination.
To enable call forward:
1. Tap at the top-left corner of the touch screen.
to mute the microphone or press it again to un-mute the microphone during
->Place call on hold during an active call.
.
or press to place a call by using the dialer.
or tap
or tap .
.
.
5