Mitsubishi Electric 800 Series Instruction Manual page 58

REVISIONS
Revision Date *Manual Number
Jul. 2014 IB-0600545-A
Aug. 2015 IB-0600545-B
Feb. 2018 IB-0600545-C
Jun. 2020 IB-0600545-D
Nov. 2021 IB-0600545-E
First edition
Added
• Setting values "4 to 7, 14 to 17" of Pr.554 PID signal operation selection
• PID control enhanced functions (Pr.111, Pr.1361 to Pr.1381)
• Compatibility with the MM-EFS 3000 r/min specification
Added
• Start count monitor (Pr.1410, Pr.1411)
• Enhanced function in the stop mode selection at communication error (Pr.502 = 4)
• Excitation current low-speed scaling factor (Pr.14 = 12 to 15, Pr.85, Pr.86, Pr.565, Pr.566, Pr.617)
• Motor induced voltage constant (Pr.1412, Pr.1413)
• Pr.1000 Direct setting selection
• Input signals (JOGF, JOGR)
• Output signal (SAFE)
• PID manipulated amount: 0 to 100% (Pr.1015 = "2, 12")
• Undervoltage level setting for the 200 V class inverter (Pr.598)
• Backup/restore
• User parameter auto storage function selection (Pr.675)
• User parameter read source selection (Pr.414 = "11, 12")
• Reset selection (Pr.75 = "1000 to 1003, 1014 to 1017, 1100 to 1103, 1114 to 1117")
Added
• Application of caution labels
Edited
• Chapters deleted (6 TROUBLESHOOTING, 7 SPECIFICATIONS)
• Tightening torque specifications
Edited
• Terminal connection diagrams
Added
• Compliance with the UK certification scheme
• Compliance with the EU ErP Directive (Ecodesign Directive)
*The manual number is given on the bottom left of the back cover.
Revision
25