Mitsubishi Electric 800 Series Instruction Manual page 39

Operation panel (FR-DU08)
3.1.1
Basic operation (factory setting)
Operation mode switchover/Frequency setting
External operation mode
First screen (Output frequency

Hold down

For the details of operation modes, refer to the Instruction Manual (Detailed).

The monitor item can be changed. (Refer to the Instruction Manual (Detailed).)

For the details, refer to the Instruction Manual (Detailed).

For the details of fault history, refer to the Instruction Manual (Detailed).

The USB memory mode indication appears while if a USB memory device is connected. Refer to the Instruction Manual (Detailed) for the details of the USB memory
mode.
10
WIRING
( At power-ON)
Value change
(Output current

monitoring)
Parameter clear
Group parameter setting Automatic parameter setting
(Example)
Fault record 1
The last eight fault records can be displayed.
On the display of the last fault record (fault record 1), a decimal point LED is ON.
When the fault history is empty,

PU operation mode
Second screen
 monitoring)
Value change
All parameter clear Fault history clear
IPM initialization

Trace function
(Example)
Blinking

Fault record 2
PU Jog operation mode
Alternating
(Example)
Frequency setting written and complete!!
Third screen

(Output voltage monitoring)
The present setting
displayed.
Alternating
(Example)
Parameter write complete!!
Parameter copy
Initial value change list

PID gain tuning
(Example)
Blinking Blinking

Fault record 8
is displayed.