®
BT‐Q1200 Ultra Super 51‐CH GPS Travel Recorder
.............................................................................................................................................................................................................................................
10. Appendix
Navigate as a Bluetooth GPS Receiver with Handheld devices
10‐1. Activate the Bluetooth function in your PDA/Smart phone
or PC
Before activating the Bluetooth function in your PDA/PC, please switch
BT‐Q1200Ultra on for paring and check if your device is equipped with Bluetooth
function. If not, you may need to acquire an optional CF/SD Bluetooth card or
Bluetooth dongle.
NOTE 1:
BT‐Q1200Ultra would be identified as"iBT‐GPS" under Bluetooth Manager. In
further use, you just need to click it to connect to this GPS Travel Recorder.
NOTE 2:
The pairing procedure is required to execute in the first time only. And the pass
code is "0000" if required.
NOTE 3:
Select correct com port and baud rate : 115,200 under your navigation software
(Most of navigation software can auto‐detect Bluetooth Com port, so you do not
need to setup manually).
Beyond
Navigation
42