Appendix; Activate The Bluetooth Function In Your Pda/Smart Phone Or Pc - Qstarz Explore 2000 Manual

Explore 2000
.................................................................................................................................................................................................................................................................................................
10. Appendix
Navigate as a Bluetooth GPS Receiver with Handheld devices
10‐1. Activate the Bluetooth function in your PDA/Smart phone or PC
Before activating the Bluetooth function in your PDA/PC, please switch Explore 2000 on for
paring and check if your device is equipped with Bluetooth function. If not, you may need to
acquire an optional CF/SD Bluetooth card or Bluetooth dongle.
NOTE 1: Explore 2000 would be identified as "Qstarz GPS" under Bluetooth Manager. In
further use, you just need to click it to connect.
NOTE 2: The pairing procedure is required to execute in the first time only. And the pass
code is "0000" if required.
NOTE 3: Select correct com port and baud rate: 4,800~38,400 under your navigation
software (Most of navigation software can auto‐detect Bluetooth Com port, so
you do not need to setup manually).
.................................................................................................................................................................................................................................................................................................
27 www.Qstarz.com