.............................................................................................................................................................................................................................................
9. Trouble Shooting
Question
Can BT‐Q1200Ultra
be used to navigate
when travel log is
on?
I lost my travel
charger and battery.
Where can I find
replacements for
both?
How can I know if
my memory is full?
I noticed that the
internal clock time is
1 hour behind, how
can I do?
Can the logged data
be downloaded by
Bluetooth?
My BT‐Q1200Ultra
could not use 48
hours?
My Q1200Ultra is
unable to log
anymore. What's
wrong?
Beyond
Navigation
BT‐Q1200 Ultra Super 51‐CH GPS Travel Recorder
Yes, you can use BT‐Q1200Ultra to navigate when travel log is
on simultaneously.
DC Input range of BT‐Q1200Ultra is 4.5~5.5V. You can use a
travel charger which support DC output range from 4.5~5.5V.
You can also use a common mini USB cable to charge your unit
via the laptop. Besides, The battery for BT‐Q1200Ultra is
compatible with Nokia N73. The battery model is BP‐6M.
If you see the Log LED is steady lighted up, which means the
memory is full.
There is no internal clock delay; it is UTC time (Greenwich
time) that confused you. For local time, you can adjust under
<Tool> \ <Option> and see the local Date/Time under "Satellite
Information" tab of utility.
Actually it's okay for Q1200Ultra to download data via
Bluetooth interface. However, since it is not stable and with
lower download performance than that of USB interface, we
don't officially admit this feature.
BT‐Q1200Ultra can use 48 hours under the optimum
environment. GPS would need more power consumption
when keep trying a position fix, seeking Bluetooth connection,
or under an unstable environment (bad weather, forest,
buildings). Those would take GPS more calculation and power
consumption. So it would spend more power consumption.
After the red LED light is blanking, it still can be used for your
navigation without any problem.
Check if your Q1200Ultra's memory is full or the status in PC
utility V3 software "Data Log List" appears to be "Error!" or
not. Both can be resolved by performing a soft reset at PC
Utility software V3 "Data Log List" ‐> "Reset."
Answer
®
41