.............................................................................................................................................................................................................................................
4.1 Connection Setting
I. Auto Scan GPS Module (Recommended)
The program will automatically detect the com port. It is recommended to
set to auto scan.
II. Manual Setting
Users can also manually set the port. Although it can speed up the initial
connect time, but it is not recommended unless users understand the
valid port.
To find the valid com port, please go to <Device Manager> and expand
the <Ports (COM & LPT)> and check "CP210x USB to UART Bridge
Controller" to see which COM port is assigned to Travel Recorder. (COM4
is for example)
Beyond
Navigation
BT‐Q1200 Ultra Super 51‐CH GPS Travel Recorder
®
16