.............................................................................................................................................................................................................................................
5. Hardware Introduction
5‐1. Appearance
1. Power jack (mini USB type)
2. Power Button (ON/OFF/Enable LOG
mode/Disable LOG mode)
3. Battery status LED (Red/Green)
4. Bluetooth status LED (Blue)
5. GPS status LED (Orange)
6. LOG status LED (Blue)
7. Internal antenna
8. Solar panel (Auxiliary power source)
5‐2. Hardware Function
Hardware Function
Power Jack
Power Button (On)
Power Button (Off)
Power Button
(Enable Log mode)
Power Button
(Disable Log mode)
Beyond
Navigation
BT‐Q1200 Ultra Super 51‐CH GPS Travel Recorder
Take the power cable and connect it to the power jack
(mini USB type) for charging only
Press power button and hold for 3 sec to power
BT‐Q1200Ultra on.
Press power button and hold for 3 sec to power
BT‐Q1200Ultra off
After power BT‐Q1200Ultra on, press power button
once to enable log mode. Then BT‐Q1200Ultra would
start logging with the blinking LOG status LED (blue).
Press power button again to disable log mode. The LOG
status LED (blue) would be off, and stop logging.
Description
®
4