Step
Screw (quantity)
4
M2 × 4 mm, wafer-head, nylon-coated (2)
When installing: Ensure that the connector is attached firmly.
1130 Fingerprint reader cable, bracket and board
For access, remove these FRUs in order:
• "Removing the nano-SIM card and the nano-SIM-card tray" on page 68
• "1020 Base cover assembly" on page 70
• "1090 Built-in battery" on page 78
Removal steps of the fingerprint reader cable, bracket and board (for models without RFID)
84
T14 Gen 1 and P14s Gen 1 Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)