Setting The Security Chip; Using The Fingerprint Reader - ThinkPad E460 User Manual

Setting the security chip

Strict security requirements are imposed on network client computers that transfer confidential information
electronically. Depending on the options you ordered, your computer might have an embedded security
chip, a cryptographic microprocessor. With the security chip, you can do the following:
• Protect your data and system
• Strengthen access controls
• Secure communications
Before you start, print these instructions.
To set an item on the Security Chip submenu, do the following:
1. Turn off your computer. Wait for about five seconds, and then turn on your computer again.
2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
3. Select Security ➙ Security Chip by using the directional keys.
4. Press Enter. The Security Chip submenu opens.
5. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter.
6. Set other items that you want to set.
7. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes
and exit.
Notes:
• Ensure that the supervisor password has been set in ThinkPad Setup. Otherwise anyone can change the
settings for the security chip.
• If the security chip is inactive or disabled, the Clear Security Chip option will not be displayed.
• When you clear the security chip, turn off your computer and then turn it on again after you set the
security chip to Active. Otherwise, the Clear Security Chip option is not displayed.

Using the fingerprint reader

Depending on the model, your computer might have a fingerprint reader. Fingerprint authentication can
replace your Windows password. In this way, you can log in to your computer simply and securely. To
enable fingerprint authentication, enroll your fingerprints first.
Enrolling your fingerprint
To enroll your fingerprints, do the following:
• For Windows 7:
1. Start the Lenovo Fingerprint Manager program. For instructions on how to start the Lenovo
Fingerprint Manager program, see "Lenovo programs" on page 11.
2. Enter the Windows password as required.
3. Click the icon for the finger that you want to enroll, and constantly swipe your corresponding finger
across the fingerprint reader until the enrollment is completed. For more information, see "Swiping
your finger over the fingerprint reader" on page 52.
4. Click Finish. Your fingerprint is enrolled successfully.
For more information on how to use the fingerprint reader, refer to the help system of the Lenovo
Fingerprint Manager program.
51
.
Chapter 5 Security