AP-2 Manual
Specifications
Pump
Long AP-2/BL
Short AP-2/BL
Long AP-2/TL
Short AP-2/TL
Component Materials
Component materials include stainless steel, Viton, nylon, epoxy, PTFE (e.g.-Teflon),
polyethylene, titanium, PVDF (e.g.-Kynar). Hose connections can be brass or stainless
steel.
Materials may vary depending on site specific needs.
Performance and Air Use Curves
See Appendices A and B.
Landfill Pump Configurations
All lengths (Long and Short) and intake configurations (Bottom-Loading) are available
in models for landfill leachate, condensate pumping and dewatering applications. (See
Figure 5)
Landfill Pump Specifications
Pump
Long AP-2/BL
Short AP-2/BL
Component Materials
Component materials include stainless steel, Viton, nylon, epoxy, PTFE (e.g.-Teflon),
polyethylene, titanium, PVDF (e.g.-Kynar). Hose connections are usually stainless steel.
Materials may vary depending on site specific needs.
Page 16
Length
Vol/Cycle Range
55-inches
0.14 gal - 0.17 gal
139-cm
.53 L - .64 L
33-inches
0.05 gal - 0.08 gal
85-cm
.19 L - .30 L
57-inches
0.14 gal - 0.17 gal
144-cm
.53 L - .64 L
35-inches
0.05 gal - 0.08 gal
89-cm
.19 L - .30 L
Length
Vol/Cycle Range
57-inches
0.14 gal - 0.17 gal
144-cm
.53 L - .64 L
35-inches
0.05 gal - 0.08 gal
89-cm
.19 L - .30 L
QED Environmental Systems
Outside
Weight
Diameter
7.8 lb
1.75-in
3.6 kg
4.45-cm
5.4 lb
1.75-in
2.5 kg
4.45-cm
7.8 lb
1.75-in
3.6 kg
4.45-cm
5.4 lb
1.75-in
2.5 kg
4.45-cm
Outside
Weight
Diameter
7.9 lb
1.75-in
3.6 kg
4.45-cm
5.5 lb
1.75-in
2.5 kg
4.45-cm