Chapter 2: Overview; General Specifications - QED AutoPump AP-3 Operation Manual

AP-3 Manual
The AutoPump ® fills and empties automatically, and is very easy to install, use, and maintain.
The AutoPump is a pneumatic fluid extraction pump that pumps in pulses. It handles any
liquid which flows freely into the pump and is compatible with the component materials and
with the connecting hoses.
The AutoPump is very versatile and available in a range of lengths and fluid inlet
arrangements to meet particular site specifications.
Equipment will vary by application and site specifications. (See Chapter 3)

General Specifications

Bottom Loading
Top Loading with
Minimum Standard Fluid Inlet
Internal
Well
Top Loading with
Diameter
Optional Brass Inlet
Top Loading Cup
Pressure Range
Flow Range
Revision 3 - April, 2009
2.8-inch I.D. and larger
3.75-inch I.D. and larger
Fitting
3.0-inch I.D. and larger
Fitting
3.2-inch I.D. and larger
Long
Short
Long BL 0 to 7.3 gallons per minute (GPM)
Long TL 0 to 5.4 gallons per minute (GPM)
Short BL 0 to 6.0 gallons per minute (GPM)
Short TL 0 to 4.8 gallons per minute (GPM)

Chapter 2: Overview

5-100 psi
5-80 psi
7.2-cm I.D. and larger
9.53-cm I.D. and larger
7.6-cm I.D. and larger
8.1-cm I.D. and larger
0.4-7.1 Kg/cm2
0.4-5.7 Kg/cm2
0 to 27.6 liters per minute (LPM)
0 to 21.2 liters per minute (LPM)
0 to 22.7 liters per minute (LPM)
0 to 18.1 liters per minute (LPM)
Page 7