Adjusting The Door Shelves/Bottle Shelf - Miele KF 1801 Vi Operating And Installation Instructions

Arranging the interior fittings
To avoid damaging the telescopic
runners, make sure that they are
pushed back into the appliance.
The dividing panel in the MasterFresh
drawer can be removed for cleaning.
^ Take the MasterFresh drawer out of
the appliance completely.
^ Pull the dividing panel in the
MasterFresh drawer up and out to
remove it.
^ After cleaning, slide the dividing
panel back into the drawer.
Please note: The MasterFresh zone
does not work as efficiently without
the dividing panel in place.
To replace the drawer
^ Pull the telescopic runners out as far
as they will go.
^ Place the MasterFresh drawer on the
runners so that it engages at the
back and front.
^ Turn the slot on the pin to its vertical
position.
^ Push the MasterFresh drawer all the
way back into the appliance.
38
Adjusting the door
shelves/bottle shelf
The door shelves can be moved when
loading or unloading and for cleaning
or they can be removed completely.
^ Hold the door shelf by its frame with
both hands, raise it a little and then
tip it forwards slightly.
^ Slide the shelf in this angled position
up or down in the side runners as
required, and then lower it into its
new position.
^ Make sure that the shelf is straight.
To remove the door shelf altogether,
^ Slide it up the side runners to the
very top, then lift it out.
To replace the door shelf
^ Engage it in the runners at the top,
and lower to the position required.