Built-In Color Enhancement Light - RCA CC4392 User Manual

Built-In Color Enhancement Light
The built-in color enhancement light automatically adds light when needed.
CAMERA/OFF/VCR Switch
Video
Light
LIGHT A UTO/OFF/ON Switch
To Use the Light
1. Press and hold the small button on the
CAMERA/OFF/VCR switch while you
set it to CAMERA.
2.
Set the LIGHT A UTO/OFF/ON
switch.
• To turn the light on, set the switch
to ON.
• If you want the light to come on
automatically when the camcorder
senses there is insufficient light, set
the switch to AUTO.
Notes: For the light to operate in
AUTO, you must have a tape in the
camcorder.
If the lighting condition is unstable, the
light may turn on and off. Set the light
to ON or OFF.
• To turn the light off, set the switch
to OFF. To save battery power,
turn the light off when you are not
recording.
Notes: When the light is turned on, the
camcorder may turn off if the battery's
power is low even though the battery level
indicator is not flashing.
Avoid bumping or shaking the light when
in use. The light's bulb is sensitive when
hot and might burn out.
12