Related Manuals for ASROCK 1U2-X570/2T
Summary of Contents for ASROCK 1U2-X570/2T
- Page 1 1U2-X570/2T User Manual Version 1.0 Published January 2022 Copyright©2022 ASRock Rack INC. All rights reserved.
- Page 2 In no event shall ASRock Rack, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock Rack has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
- Page 3 Setting up the Server in a Restricted Access Location • Access can only be gained by service persons or by users who have been instructed about the reasons for the restrictions applied to the location and about any precautions that shall be taken. • Access is through the use of a tool or lock and key, or other means of security, and is controlled by the authority responsible for the location.
-
Page 4: Table Of Contents
Contents Chapter 1 Introduction Shipping Box Contents Specifications Chapter 2 Server System Overview System Components Internal Features System Front Panel System Rear Panel Front Control Panel Buttons and LEDs Chapter 3 Hardware Installation and Maintenance Server Top Cover Hard Drive Power Supply System Fan Appendix A... -
Page 5: Chapter 1 Introduction
In case any modifications of this documentation occur, the updated version will be available on ASRock Rack’s website without further notice. If you require technical support related to this product, please visit our website for specific information about the model you are using. -
Page 6: Shipping Box Contents
1.1 Shipping Box Contents Item Quantity 1U2-X570/2T Barebone (1U form factor) System Boards (MB) Power Supply Unit System Fans HDD Backplane (BPB) Front Panel Board (FPB) OCuLink to 4*SATA Cable OCuLink to PCIE68P+4Pin Cable 24Pin-to-4Pin Converter Cable 24Pin-to-4Pin Power Cable... -
Page 7: Specifications
1U2-X570/2T 1.2 Specifications 1U2-X570/2T System Physical Status Form Factor 1U Rackmount Dimension 250 x 430 x 43.5 mm (9.84" x 16.93" x 1.71") (D x W x H) Support MB Size mini-ITX (X570D4I-2T) Front Panel Buttons • Power On/Standby button •... -
Page 8: Chapter 2 Server System Overview
Chapter 2 Server System Overview This chapter provides diagrams showing the location of important components of the server system. 2.1 System Components 1 x HDD Tray 0 (Upper: 1 x 3.5” HDD / Lower: 1 x 2.5” HDD) 3 x System Fans 1 x Power Supply Unit 1 x HDD Tray 1 (1 x 2.5”... -
Page 9: Internal Features
1U2-X570/2T 2.2 Internal Features From 1 x HDD Tray 0 (Upper: 1 x 3.5" HDD / Lower: 1 x 2.5" HDD) 1 x HDD Tray 1 (1 x 2.5" NVME SSD) Chassis Handle System Fan 3 System Fan 2 System Fan 1... -
Page 10: System Front Panel
2.3 System Front Panel Description Control Panel Buttons and LEDs I/O Shield (depends on the specification of the server board) Front Vent 2.4 System Rear Panel Description Rear Vent 1 x Power Supply Unit (PSU) -
Page 11: Front Control Panel Buttons And Leds
1U2-X570/2T 2.5 Front Control Panel Buttons and LEDs Front Control Panel Description USB 3.2 Gen1 Ports Power LED Power Button System Reset Button LAN1 Activity LED LAN2 Activity LED HDD Status LED *Please be noted that the functions are supported depending on the type of the server board. - Page 12 Status LED Definitions Power LED Status Description Blue Power on Blinking Blue Standby(Sleep) mode Power off System Status LED Status Description Running or normal operation Yellow At least one sensor has critical alert HDD Status LED Status Description Blinking Green HDD access HDD idle LAN1, LAN2 LED...
-
Page 13: Chapter 3 Hardware Installation And Maintenance
1U2-X570/2T Chapter 3 Hardware Installation and Maintenance This chapter helps you assemble the chassis and install components. Before You Begin Before you work with the server, pay close attention to the “Important Safety Instructions” at the beginning of this manual. -
Page 14: Server Top Cover
3.1 Server Top Cover Removing the Server Top Cover 1. Before removing the top cover, power off the server and unplug the power cord. 2. The system must be operated with the chassis top cover installed to ensure proper cooling. 1. - Page 15 1U2-X570/2T Installing the Server Top Cover 1. Lower the top cover on the chassis, making sure the side latches align with the cutouts. 2. Slide the top cover toward the rear. 3. Secure the top cover with the screw.
-
Page 16: Hard Drive
3.2 Hard Drive Removing the HDD Tray 1. Hand release the thumbscrew that secures the HDD bracket to the upper tray. 2. Lift up and remove the bracket. - Page 17 1U2-X570/2T Installing the 2.5" HDD (for HDD Tray 0 only) You can have both a 2.5” and a 3.5” HDD installed on the HDD Tray 0. Please intall the 2.5” HDD first before installing a 3.5” HDD. See the following for detailed instructions.
- Page 18 Installing the 3.5" HDD 1. Place a 3.5" HDD into the bracket with the printed circuit board side facing down. Carefully align the mounting holes in the hard drive and the bracket. 2. Secure the hard drive using the screws. 3.
-
Page 19: Power Supply
1U2-X570/2T 3.3 Power Supply Replacing the Power Supply Before replacing the power supply, power off the server, unplug the power cord, and discon- nect all wiring from the power supply. Removing the Power Supply Unit To remove a failed power supply, identify the failed power supply by checking the power supply LEDs on the PSU. - Page 20 Installing the Power Supply Unit To install a new power supply, please follow the steps below. 1. Lower the new power supply into the chassis. Push it toward the rear side. 2. Tighten the screws to secure the power supply into place.
-
Page 21: System Fan
1U2-X570/2T 3.4 System Fan Replacing the Simple-Swap Fan 1. Press and hold the clip on the fan. 2. Lift to remove the failed fan. 3. Align the fan clip with the mounting hole on the fan bracket. Make sure the arrow on the fan pointed to the FRONT of the chassis. -
Page 22: Installing The Cpu (Amd Am4 Socket)
Appendix A Installing the CPU (AMD AM4 Socket) - Page 23 1U2-X570/2T...
-
Page 24: Installing The Cpu Heatsink
Installing the CPU Heatsink... - Page 25 1U2-X570/2T Please be aware of the correct direction when you install the CPU heatsink. Make sure the the arrow on the CPU heatsink is pointing to the opposite side of the system fan. Air Flow Direction...
-
Page 26: Installation Of Memory Modules (Dimm)
Installation of Memory Modules (DIMM) The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. For more information about DIMM installation, please refer to the User Manual that comes with the serverboard you use.