Flavel Calypso Installation, Maintenance & User Instructions page 55

5.5 LIGHTING THE APPLIANCE - ELECTRONIC FIRE CONTROL
MODELS (CONTINUED)
5.5.3 To increase the heat input level of the fire's burner pressing and
releasing the + button will increase the heat input level one step at a
time. Pressing the + button continuously will move the heat input level
to the maximum.
5.5.4 To turn the fire off press and release the power button, the burner will
extinguish.
If you are not intending to use the fire for a long period (i.e.
5.5.5
over the summer months) the battery life can be extended by
sliding the power isolator switch to the left (to the "0" position
away from the "1" position) on the valve itself, which is located
behind the ashpan cover on the fire.
5.5.6 In the event of EFC switch malfunction, as a backup the fire can
be controlled from the valve, which is located behind the ashpan
cover on the fire, see section 5.6 for full manual operating
instructions. If your fire does not operate manually please consult
the troubleshooting chart on the rear page of this manual.
IMPORTANT NOTE : THE BATTERIES SHOULD BE REPLACED WITH GOOD QUALITY
ALKALINE BATTERIES WHEN REQUIRED, THE BATTERY LIFE IS EXPECTED TO BE A
MINIMUM OF 12 MONTHS WITH NORMAL USAGE. FOR BEST PERFORMANCE BFM EUROPE
RECOMMEND THE USE OF ENERGIZER BATTERIES WITH ITʼS PRODUCTS.
55