Advertisement
Basics
| 1 | Recording Status LED Indicator | Steady on: Standby Flashing: Recording |
| 2 | Wi-Fi Status LED Indicator | Unlit: Wi-Fi is off Flashing: Wi-Fi is on |
| 3 | MIC | Microphone |
| 4 | LED Indicator for Charging | |
| 5 | micro-HDMI Interface | Connect with HDMI cable. |
| 6 | microSD Card Slot | Insert a microSD card for storage. The microSD card is not included in the box. Please purchase separately (see recommended microSD card models). |
| 7 | Type-C Interface | Connect with data cable or power adapter. |
| 8 | Loudspeaker | |
| 9 | Shutter | Start/stop recording |
| 10 | Power Button | Hold it to power on/off |
| 11 | LCD Screen | LCD touch screen |
| 12 | Wi-Fi Button | Hold long to enable Wi-Fi. |
| 13 | Battery Cover | Open it to access the battery. |
| 14 | Standard Bracket Interface (1/4 inch) | Interface for various brackets. |
Display Introduction
- micro SD Card Status
- Live View
- Tap to select camera mode
- Tap to set resolution
- H.265 Status
- Battery Power
- Slide downwards to set parameters
- Tap to set more parameters
- Tap to set frame rate
Use Gestures on Your Camera
 | Tap the Screen Open/close display information |
 | Swipe to the Left Choose the camera mode. |
 | Swipe to the Right View photos or videos, etc. |
 | Swipe Downwards Enable Lock Screen or other settings. |
 | Swipe Downwards in the Setting Page Return to Live View. |
Operation
Step 1
Insert the microSD card.
The camera supports video and picture storage in the local memory card.
MicroSD Card Capacity: > 4GB
MicroSD Card Level Requirement: Class 10 or above.
MicroSD Card Recommendation:
SANDISK EXTREME® 32GB microSDHCTM
SANDISK EXTREME® 64GB microSDHCTM
LEXAR® 32GB microSDHCTM
LEXAR ® TM 64GB microSDHC
Step 2
Charger
- Install the Batter
Hold the arrow and push the battery cover according to the arrow direction. Insert the battery with EZVIZ logo facing upwards and close the cover.
![Install the Batter]( "EZVIZ - S6 - Install the Batter")
- Connect to Outlet
Use the power cable to connect your camera and the power outlet.
![Connect to Outlet]( "EZVIZ - S6 - Connect to Outlet")
For the first time use: you are recommended to fully charge the camera in the power-off status before you use the camera
Power-on and Power-off
Power on
Hold down the power button 
and release until the startup sound plays.
Power off
Hold down the power button and release until the power-off sound plays.
DO NOT power off the camera when the camera is recording or capturing photos.
Voice Control
Go to Setup -> Voice Control to control the camera via your voice.
Read the following commands to control your camera.
EZVIZ start recording
EZVIZ stop recording
EZVIZ take photo
EZVIZ start burst
This function only works when you read the command in English.
For detailed information, please go to www.ezvizlife.com.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the S6 and is the answer not in the manual?
Questions and answers