Setting The Machine To Match Turf Conditions - Toro 04019 Operator's Manual

Setting the Machine to Match
Turf Conditions
Note: Use the following table to set the machine to match turf conditions.
Bedbars: Standard and Optional
Part Number
106-2468-01 Standard
99-3794-03 Aggressive
110-2282-01 Standard
110-2281-03 Aggressive
Bedknives: Standard and Optional
Part Number
93-4262 Microcut
93-4263 Tournament
93-4264 Low Cut
108-4303 Extended Microcut
98-7261 Microcut
98-7260 Tournament
110-2300 Extended Microcut
110-2301
Low Cut
Rollers: Standard and Optional
Part Number Description
107-9037 Narrow Wiehle
107-9038 Wide Wiehle
107-9039 Full Roller
107-9036 Rear Roller
106-6945 Rear Roller
93–9045 Anti Scalp Wiehle
110-2304 Narrow Wiehle
110-2305 Wide Wiehle
110-2306 Full Roller
110-2303 Rear Roller
Flex Greensmower Cutting Unit Set-up Matrix
Description Mower
Flex 21
Flex 21
Flex 18
Flex 18
Description Mower
Flex 21
Flex 21
Flex 21
Flex 21
Flex 18
Flex 18
Flex 18
Flex 18
Mower
Flex 21
Flex 21
Flex 21
Flex 21
Flex 21
Flex 21
Flex 18
Flex 18
Flex 18
Flex 18
Aggressiveness
Less
More
Less
More
Height of Cut Range
0.062 - 0.125 inches
0.125 -0.25 inches
0.25 inches and up
0.062 - 0.125 inches
0.062 - 0.125 inches
0.125 -0.25 inches
0.062 - 0.125 inches
0.25 inches and up
Diameter/Material
2.5 inches Aluminum
2.5 inches Aluminum
2.5 inches Steel
2.0 inches Aluminum
2.0 inches Steel
2.5 inches Aluminum
1–7/8 inches longer
2.5 inches Aluminum
2.5 inches Aluminum
2.5 inches Steel
2.0 inches Aluminum
35
Comments
Standard
Standard
Comments
Standard
Less Aggressive
Standard
Less Aggressive
Comments
Standard Front
More Penetration
Least Penetration
Standard Rear
Steel Rear
More edge support
Standard Front
More Penetration
Least Penetration
Standard Rear