Setting The Machine To Match Turf Conditions - Toro 04202 Operator's Manual

Setting the Machine to Match Turf Conditions

Use the following table to set the machine to match turf conditions.
Bedbars: Standard and Optional
Part Number
106-2468-01 Standard
99-3794-03 Aggressive
110-2282-01 Standard
110-2281-03 Aggressive
Bedknives: Standard and Optional
Part Number
93-4262 Microcut
115–1880 EdgeMax Microcut
93-4263 Tournament
115–1881 EdgeMax Tournament
93-4264 Low Cut
108-4303 Extended Microcut
98-7261 Microcut
117–1530' EdgeMax Microcut
98-7260 Tournament
EdgeMax Tournament
117–1532'
110-2300 Extended Microcut
110-2301 Low Cut
Rollers: Standard and Optional
Part Number Description
107-9037 Narrow Wiehle
107-9038 Wide Wiehle
107-9039 Full Roller
107-9036 Rear Roller
106-6945 Rear Roller
93–9045 Anti Scalp Wiehle
Flex Greensmower Cutting Unit Set-up Matrix
Description Mower
Flex 21
Flex 21
Flex 18
Flex 18
Description Mower
Flex 21
Flex 21
Flex 21
Flex 21
Flex 21
Flex 21
Flex 18
Flex 18
Flex 18
Flex 18
Flex 18
Flex 18
Mower
Flex 21
Flex 21
Flex 21
Flex 21
Flex 21
Flex 21
Aggressiveness
Less
More
Less
More
Height of Cut Range
0.062 - 0.125 inches
(1.57-3.1 mm)
0.062 - 0.125 inches
(1.57-3.1 mm)
0.125 -0.250 inches
(3.1-6 mm)
0.125 -0.250 inches
(3.1-6 mm)
0.250 inches (6 mm) and up
0.062 - 0.125 inches
(1.57-3.1 mm)
0.062 - 0.125 inches
(1.57-3.1 mm)
0.062 - 0.125 inches
(1.57-3.1 mm)
0.125 -0.250 inches
(3.1-6 mm)
0.125 -0.250 inches
(3.1-6 mm)
0.062 - 0.125 inches
(1.57-3.1 mm)
0.250 inches (6 mm) and up
Diameter/Material
2.5 inches (63.5 mm)
Aluminum
2.5 inches (63.5 mm)
Aluminum
2.5 inches (63.5 mm) Steel
2.0 inches (50.8 mm)
Aluminum
2.0 inches (50.8 mm) Steel
2.5 inches (63.5 mm)
Aluminum 1–7/8 inches
(47.4 mm) longer
7
Comments
Standard
Standard
Comments
Standard (11 Blade)
Standard (14 Blade)
Longer Wearing
Less Aggressive
Standard (11 Blade)
Standard (14 Blade)
Longer Wearing
Less Aggressive
Comments
Standard Front
More Penetration
Least Penetration
Standard Rear
Steel Rear
More edge support