Related Manuals for Quatech DS-PCIE-100
Summary of Contents for Quatech DS-PCIE-100
- Page 1 DS-PCIE-100 User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. MN2000000083 May/07...
-
Page 2: Features And Benefits
Features and Benefits Features Connectors Package Contents 1 x DS-PCIE-100 Card 1 x Driver CD System Requirements Windows® 2000/XP/Server 2003/Vista PCI Express-enabled system with an available PCI Express slot May/07 Compliant with PCI Express Base Specification 1.0a Supports 2 x 16550 Fast UART serial ports Serial data transfer rate up to 115200bps Support Windows®... -
Page 3: Hardware Installation
Hardware Installation Turn Off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCIe slot. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. -
Page 4: For Windows Xp
D:\Drivers\PCIExpress\DS-PCIE-100\2000, then click OK. (Change D: to match your CD-ROM driver letter) Click Next and Finish. Restart Windows to complete the installation. For Windows® XP At the Found New Hardware Wizard, select Install from a list or specific location (Advanced), then click Next. -
Page 5: For Windows Vista
Insert the Driver CD, check Include this location in the search, uncheck the other box, type in the following path D:\Drivers\PCIExpress\DS-PCIE-100\2003, then click OK. (Change D: to match your CD-ROM drive letter) If the Hardware Installation window pops up, click Continue Anyway, then Finish. -
Page 6: Change Com Port Number
Click on Close to complete the driver installation. To Verify Windows® Driver Installation Right click My Computer, then click Manage. Click Device Manager. Click on the +(plus sign) in front of Ports(COM & LPT), two MosChip PCI Serial Port … should be displayed. Double click Multifunction adapters, MosChip PCI Multi-I/O Controller should be displayed. - Page 7 Click OK, then close Device Manager to save the changes. Follow steps 1-4 again to change the other serial ports if needed. May/07 MN2000000083...