Related Manuals for Quatech DP-PCIE-100
Summary of Contents for Quatech DP-PCIE-100
- Page 1 DP-PCIE-100 User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. MN2000000087 May/07...
-
Page 2: Features And Benefits
Features and Benefits Features Connectors Package Contents 1 x DP-PCIE-100 Card 1 x Bracket with one DB25 female parallel port 1 x Driver CD System Requirements Windows® 2000/XP/Server 2003/Vista PCI Express-enabled system with an available PCI Express slot May/07 Compliant with PCI Express Base Specification 1.0a... -
Page 3: Hardware Installation
Hardware Installation Turn Off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCIe slot. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. -
Page 4: For Windows 2000
Check Specify a location, uncheck the other boxes, then click Next. Insert the Driver CD, type in the following D:\Drivers\PCIExpress\DP-PCIE-100\2000, then click OK. (Change D: to match your CD-ROM driver letter) Click Next and Finish. Restart Windows to complete the installation. -
Page 5: For Windows Vista
(Advanced), then click Next. Insert the Driver CD, check Include this location in the search, uncheck D:\Drivers\PCIExpress\DP-PCIE-100\2003, then click OK. (Change D: to match your CD-ROM drive letter) If the Hardware Installation window pops up, click Continue Anyway, then Finish. - Page 6 Select the option Browse my computer for driver software (advanced). Insert the driver CD, check Include subfolders, type in D:\Drivers\PCIExpress\DP-PCIE-100\Vista32, then click Next. (Change D: to match your CD-ROM drive letter) If the system prompts the user informing the drivers are not signed, select the option Install this driver software anyway.
- Page 7 work. If your parallel device works properly, do not change this setting. For Windows® 2000/XP/Server 20003/Vista Installation From the Device Manager window double click Ports(COM & LPT), then double click the MosChip PCI Parallel Port Click Port Settings tab. At the LPT Port Number box, click the down arrow and select an LPT port that is not in use.