Related Manuals for Quatech DSSP-PCIE-100
Summary of Contents for Quatech DSSP-PCIE-100
- Page 1 DSSP-PCIE-100 User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. MN2000000079 May/07...
-
Page 2: Features And Benefits
Features and Benefits Features Connectors Package Contents 1 x DSSP-PCIE-100 Card 1 x Bracket with two DB9 male serial ports 1 x Driver CD May/07 Compliant with PCI Express Base Specification 1.0a Supports Standard Parallel Port(SPP), Enhanced Parallel Port(EPP) Port(ECP) Parallel data transfer rate up to 1.5MB/Sec... -
Page 3: System Requirements
System Requirements Windows® 2000/XP/Server 2003/Vista PCI Express-enabled system with an available PCI Express slot Hardware Installation Turn Off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCIe slot. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. -
Page 4: For Windows Xp
Check Specify a location, uncheck the other boxes, then click Next. Insert the Driver CD, type in the following path D:\Drivers\PCIExpress\DSSP-PCIE-100\2000, then click OK. (Change D: to match your CD-ROM driver letter) Click Next and Finish. Restart Windows to complete the installation. -
Page 5: For Windows Vista
Insert the Driver CD, check Include this location in the search, uncheck the other box, type in the following path D:\Drivers\PCIExpress\DSSP-PCIE-100\2003, then click OK. (Change D: to match your CD-ROM drive letter) If the Hardware Installation window pops up, click Continue Anyway, then Finish. - Page 6 Insert the driver CD, check Include subfolders, type in D:\Drivers\PCIExpress\DSSP-PCIE-100\Vista32, then click Next. (Change D: to match your CD-ROM drive letter) If the system prompts the user informing the drivers are not signed, select the option Install this driver software anyway.
- Page 7 LPT), then double click the MosChip PCI Serial Port you want to change. Click the Settings tab and then click Advanced. Click the down arrow that is next to the COM Port Number box, select a COM port that is not in use, then click OK. Click OK, then close Device Manager to save the changes.