Adjusting The Airflow Direction - Daikin FVXS50KV1A Operation Manual

Adjusting the Airflow Direction

You can adjust the airflow direction to increase
your comfort.
■ To adjust the flap
(horizontal blade)
1. Press "SWING button".
• " " is displayed on the LCD and the
flap will begin to swing.
2. When the flap has reached the
desired position, press
"SWING button" once more.
• The flap will stop moving.
• " " disappears from the LCD.
■ To adjust the louvers
(vertical blades)
Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-
side blades.)
Notes on flap and louvers angle
• Unless "SWING" is selected, you should set the
flap at a near-horizontal angle in HEAT operation
and at a upward position in COOL or DRY
operation to obtain the best performance.
■ ATTENTION
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
12
HEAT
COOL/
DRY
1, 2