Troubleshooting - Encore RAGE ER48FX730VL Operator's Manual

Table of Contents

Advertisement

IMPORTANT: It is essential that all operator safety mechanisms be connected and in proper operating
condition prior to mower use.
When a problem occurs, do not overlook the simple causes. For example, starting problems could be
caused by an empty fuel tank.
The following table lists some of the common causes of trouble. Do not attempt to service or replace
major items or any items that call for special timing of adjustments procedures. Have this work done by
your Service Dealer.
PROBLEM
Engine will not start or is Hard To Start
Stops Suddenly or Lacks Power
Engine Overheats
Mower Pulls Left or Right
Mower Cuts Unevenly
Mower Deck Not Engaging
Mower Vibrates
Mower moves slowly or not at all
Hydraulic Oil Leakage

TROUBLESHOOTING

POSSIBLE CAUSE
No Fuel
Controls are not positioned properly for start
Air Filter or Air Screen is Dirty
Faulty Spark Plug
Improper Fuel
No Fuel or improper Fuel
Engine Overloaded
Dirt in Fuel Line
Air Filter or Air Screen is Dirty
Incorrect Oil Level
Blocked Fuel Filter
Engine Overloaded
Dirty Air Filter or Air Screen
Dirt in Fuel Line
Incorrect Oil Level
Unequal Tire Pressure
Tracking Adjustment Incorrect
Unequal Tire Pressure
Deck leveling Incorrect
Blades Dull or Damaged
Belt is damaged or has slipped
Blades Dull or Damaged
Engine Bolts are Loose
Drive belt for Hydraulic is loose or has slipped
Air in Hydraulics
Bypass valve on pump is open
Damaged Seals or gaskets
Air in Hydraulics
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rage er48fx730vlcaRage er52fx730vlRage er52fx730vlca

Table of Contents