Safety; Safety Alert Symbol; Training; Preparation - Encore RAGE ER48FX730VL Operator's Manual

SAFETY

Safety Alert Symbol

This symbol means: ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!
The safety alert symbol appears above information
which alerts you to unsafe actions or situations and
will be followed by the word
WARNING, CAUTION.
or
DANGER:
White lettering/Red background.
Indicates failure to observe the safety instructions
will result in death or serious injury.
WARNING: Black letters on orange
background.
Indicates failure to observe safety instructions could
result in death or serious injury.
CAUTION: Black letters on yellow
background.
Indicates failure to observe the safety instructions
may result in death or serious injury.
DANGER,

TRAINING


Read the instructions carefully. Become
familiar with the safe operation of the
equipment, operator controls, and safety signs.

All operators need to be trained before
operating this unit.

Never let children or untrained people operate
the equipment without proper instruction.

Keep everyone, especially children and pets,
away from the area of operation. Remember
that the operator or user is responsible for
accidents or hazards occurring to other people
or their property.

PREPARATION


Evaluate the terrain to determine what
accessories and attachments are needed to
properly and safely perform the job. Use only
accessories and attachments approved by
ENCORE

The use of personal protective equipment, such
as (but not limited to) safety glasses, hearing
protection, substantial footwear and long
trousers is highly recommended.
CAUTION
This machine produces sound levels in excess
of 85 dBA at the operator's ear and can cause
hearing loss through extended periods of
exposure.
Wear hearing protection when operating this
machine.

Thoroughly inspect the area where the
equipment is to be used and remove all stones,
sticks, wires, bones, and other foreign objects
which may damage the equipment or cause
personal injury to operator or bystanders.

Check that the operator's presence controls,
safety switches, and shields are attached and
6