Safety And Instructional Decals - Encore RAGE ER48FX730VL Operator's Manual

SAFETY AND INSTRUCTIONAL
DECALS
 Keep all safety signs legible. Remove all
grease, dirt and debris from safety signs
and instructional labels.
 Replace all worn, damaged, or missing
safety signs.
 When replacement components are
installed, be sure that current safety signs
are affixed to the replaced components.
 If an attachment or accessory has been
installed, make sure current safety signs
are visible.
8304
463448
 New safety signs may be obtained from
your authorized Encore equipment dealer.
 Safety signs may be affixed by peeling off
the backing to expose the adhesive
surface. Apply only to a clean, dry surface.
Smooth to remove any air bubbles.
 Familiarize yourself with the following safety
signs and instructional labels. They are
critical to the safe operation of your
machine.
363023
12
8308
8008