Operation; Operating The Power Take Off (Pto); Attachment Lift Lever - Toro Wheel Horse 78305 Operator's Manual

Operation

Operating the
Power Take Off (PTO)
The power take off (PTO) engages and disengages
power to the clutch.
Engaging the Power Take Off (PTO)
1. Depress the clutch and brake pedals to stop the
machine.
2. Push the power take off (PTO) lever forward to
engage (Fig. 17).
Figure 17
1. Engaged
Disengaging the Power Take Off (PTO)
1. Depress the clutch and brake pedals to stop the
machine.
2. Pull the power take off (PTO) lever back to
disengage (Fig. 17).
10
1
2
m–3430
2. Disengaged

Attachment Lift Lever

The attachment lift lever (Fig. 18) is used to raise and
lower various attachments.
Raising Attachments
1. Depress the clutch and brake pedals to stop the
machine.
2. Pull attachment lift lever rearward until latch
locks. In this position the lift will hold the
attachment in the up, or raised position.
Lowering Attachments
1. Depress the clutch and brake pedals to stop the
machine.
2. Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release
the latch. Move lift lever forward to lower
attachment.
2
1
Figure 18
1. Lift lever
2. Button
3
m–2514
3. Dial-A-Height