Power Take Off (PTO) Belt
1.
Remove the two wing nuts and belt cover from
the tractor (Fig. 28).
2
Figure 28
3. Belt cover
2.
Turn knob on idler assembly clockwise to loosen
belt (Fig. 29).
3.
Remove locknut and belt cover from idler
assembly. Remove belt from upper mower
pulley (Fig. 29).
3
4
5
6
Figure 29
1. V pulley
2. Flat pulley
3. Upper mower pulley
4. Spacer
2
1
m–2534
4. Wing nut
7
1
2
m–2823
5. Belt cover
6. Locknut
7. Knob
4.
Unlatch and remove locking clevis pin that
secures yoke assembly to clutch shaft. Pivot
yoke out and forward to remove from clutch
shaft and engagement plate (Fig. 30).
5.
Replace belt in inside pulley groove (Fig. 30).
6.
Assemble yoke and engagement plate and attach
locking clevis pin, trunnion and hairpin cotters
to secure (Fig. 30).
1
2
5
4
Figure 30
1. Hairpin cotter
2. Trunnion
3. Engagement plate
4. Locking clevis pin
Maintenance
3
7
6
1
m–2691
5. Yoke
6. Clutch shaft
7. Inside groove
17