Table of Contents
Advertisement
Assembly
Installing the Mower
1.
Park the machine on a level surface, disengage
the power take off (PTO), set the parking brake,
and turn the ignition key to "OFF" to stop the
engine. Remove the key.
2.
Turn the front wheels fully to the left and raise
attachment lift lever all the way to the latched
position; refer to tractor Operator's Manual.
3.
Open front and mid-mount hitches by pushing
release button and moving lock handles forward
(Fig. 1).
1
4
Figure 1
1. Front hitch
2. Mid-mount hitch
4
2
3
3
m–2312
3. Release button
4. Lock handle
4.
Slide the mower under the chassis from the right
side and align attachment lift with slot in center
lever bar (Fig. 2).
5.
Straighten the front wheels, turn Dial-A-Height
knob counterclockwise, all the way, and lower
the attachment lift lever to the mounting
position; refer to tractor Operator's Manual.
6.
Place attachment lift pin into slot in center lever
bar and secure with 3/4" (19 mm) washer and
hairpin cotter (Fig. 2).
4
1. Attachment lift
2. Slot-center level bar
1
3
4
Figure 2
3. Washer
4. Hair pin cotter
2
m–2824
Advertisement
Table of Contents
