Rehanging Of Door - Asko DC7784HP.S.UK User Manual

REHANGING OF DOOR

The pictures below illustrate rehanging from right-hung door to left-hung.
Rehanging kit
For rehanging, a rehanging kit must be ordered from the supplier of the cabinet. The kit
consists of a new upper hinge, as the left and right hinges are not interchangeable. The kit
also includes a control cable for fi tting in the door with associated hinge bushing.
Lay the cabinet down carefully on
its back.
_______________________________
NB
Before placing the cabinet on its back, take out
and empty the water tank.
______________________________________
1
Detach the two screws holding the outer roof.
The screws are located beneath the blind
plugs (1). as illustrated, and remove the roof.
2
Remove the protective cover (2) on the upper
hinge and separate the door cable (3) from
the connector (4). Thread the cable through
the hole in the chassis and stretch out the
cable.
3
Remove the upper hinge and release the
cable from the hinge. The hinge has a slot
through which the cable can be threaded.
See illustration.
Release the door from the hinge and togeth-
er with the control cable lay it aside.
4
Fit the new replacement hinge, which is
included in the rehanging kit, on the opposite
side. Use the same screws as previously.
1
OUTER
ROOF
3
2
Upper hinge with slot
4
for cable
13