Danfoss DHP-AT Installation Manual page 9

Hide thumbs Also See for DHP-AT:

Table of Contents

Installation Guide

Fig. 1: Positioning heat pump

Avoid placing the heat pump near windows or walls to noise sensitive areas.

Ensure that there is sufficient distance to neighbouring properties so that they are not exposed to noise. Ap-

plicable local regulations must be followed.

The heat pump must not be built in into any cabinet or similar.

Keep the heat pump and its immediate area free of snow, ice, leaves etc.

Fig. 2: Installation space

Remember that the heat pump must have a certain amount of space in order to function and for servicing.

Otherwise there is a risk that the air will recirculate from exhaust to intake. Avoid this by following the dimen-

sions given above.

Danfoss Heating Solutions

DHP-AT

VMGFI302

Table of Contents

Need help?

Do you have a question about the DHP-AT and is the answer not in the manual?