Advertisement
STEP 4
4
STEP 5
STEP 6
STEP 7
E
STEP 8
A 2PCS
A
5
B 2PCS
B
C 2PCS
D 2PCS
D
G
E 2PCS
F 2PCS
F
G 2PCS
6
Assembly & Operation | 5
Assembly & Operation | 5
Install grill roll dome handle (4) to the
roll dome (5) using Screw-A (2PCS) and
Washer-H (2PCS).
Secure roll dome (5) using
Bolt-B (2 PCS).
Tighten Nut-C onto Bolt-B,
insert Pin-D to hold in place.
Repeat on opposite side.
C
Insert Bolt-G into the hole in the
side panel, attach Female Coupling
Nut-F to Bolt-G, then secure with
Nut-E. Repeat on the opposite side.
Install thermometer (6) onto the
roll dome (5).
The roll dome is now fully assembled.
If you have a 60" or 72" grill, repeat
steps for the other side of the grill.
Advertisement
