Advertisement
Quick Links
Download this manual
See also:
User Manual
LP GAS 60" COMMERCIAL
OUTDOOR GRILL
ASSEMBLY INSTRUCTIONS
Intertek
Intertek
#554C3H860 LP - Base Grill
03/2016
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU ARE
ASSEMBLING THIS UNIT FOR SOMEONE ELSE, GIVE THIS MANUAL TO HIM OR
HER TO SAVE FOR FUTURE REFERENCE.
ASSEMBLY OF THIS UNIT REQUIRES 2 ADULTS.
1
Advertisement
Related Manuals for Backyard Pro 554C3H860 LP
Summary of Contents for Backyard Pro 554C3H860 LP
-
Page 1: Assembly Instructions
LP GAS 60” COMMERCIAL OUTDOOR GRILL ASSEMBLY INSTRUCTIONS Intertek Intertek #554C3H860 LP - Base Grill 03/2016 SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU ARE ASSEMBLING THIS UNIT FOR SOMEONE ELSE, GIVE THIS MANUAL TO HIM OR HER TO SAVE FOR FUTURE REFERENCE. - Page 3 Parts List and Hardware...
- Page 4 Exploded Parts View...
- Page 5 Assembly Instructions STEP 1 Install casters (1) to the under shelf (2) and using BOLT A--16PCS. Set brakes on for safe assembly. STEP 2 Insert the legs (3) into the sockets using BOLT B—4 PCS, and tighten the legs. STEP 3 Attach propane holder (4) to the under shelf using BOLT A—4 PCS.
- Page 6 Assembly Instructions STEP 4 Set the grill section (5) on to the legs and under shelf. STEP 5 Tighten the legs using BOLTB----4 PCS. So the grill and legs are secure. STEP 6 Attach handles (6) to each side, using BOLT A–...
- Page 7 Assembly Instructions STEP 7 Attach top propane tank holder (7) to the grill using BOLT A--- 4 PCS. STEP 8 Place the burner covers (8) into their position. STEP 9 Add grates (9) to the top of the grill.
- Page 8 Assembly Instructions STEP 10 Insert grease tray (10) in the back of the grill. Then the grill is fully assembled FULLY ASSEMBLED...
- Page 9 Dome Lid Assembly Instructions DOME LID ASSEMBLY Please note: Lids are packaged individually for customer convenience and shipping convenience. The assembly require 2 adults. Parts List and Hardware...
- Page 10 Assembly Instructions STEP 1 Install back panel (3) to left side panel (2) and right side panel (1) using BOLT A –6 PCS and NUT F—6 PCS. STEP 2 Put the pre-assembled part to the grill like shown in the picture. STEP 3 Tighten the window screen to the grill body using BOLT A—...
- Page 11 Assembly Instructions STEP 4 Install the lid handle (4) to the lid (5) using BOLT A—2 PCS and G—2 PCS. STEP 5 Put lid to the grill body and tightened by BOLT B-2 PCS and NUT C—2 PCS. Please note, when install the lid, first, use a wrench to fix the BOLT B from outside, then Install the NUT C from inside, from this way, you can assemble the lid easy.
- Page 12 Assembly Instructions STEP 7 Attach the BOLT D from inside panel to outside. BOTL will help to limit the position of lid when opened. To ensure the lid can’t be tip off, and keep the two lids in the same level. STEP 8 Install Thermometer (6) to both lids.