Page 1
LP GAS 30” COMMERCIAL OUTDOOR GRILL ASSEMBLY INSTRUCTIONS Intertek Intertek #554C3H830 LP - Base Grill 03/2016 09/2017 09/2017 SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU ARE ASSEMBLING THIS UNIT FOR SOMEONE ELSE, GIVE THIS MANUAL TO HIM OR HER TO SAVE FOR FUTURE REFERENCE.
Page 5
Assembly Instructions Step 1: Install casters(1) to the under shelf(2) and using BOLT A-- 16PCS. Set brakes on for safe assembly. Step 2: Insert the legs(3) into the sockets using BOLT B—4 pcs, and tighten the legs.
Page 6
Assembly Instructions Step 3: Attach propane holder(4) to the under shelf using BOLT A-3 pcs under shelf using BOLT A-2 pcs Step 4: Set the grill section(5) on to the legs and under shelf.
Page 7
Assembly Instructions Step 5: Tighten the legs using BOLTB-- --4 pcs. So the grill and legs are secure. Step 6: Attach handles(6) to each side, using BOLT A– 4pcs...
Page 8
Assembly Instructions Step 7: Attach top propane tank holder(7) to the grill using BOLT A--- 2 pcs. Step 8: Place the burner covers(8) into their position.
Page 9
Assembly Instructions Step 9: Add grates(9) to the top of the grill. Step 10: Insert grease tray(10) in the back of the grill. Then the grill is fully assembled.
Page 10
Assembly Instructions Step 11: Put the gas tank above the shelf and hang the tank on bottle hook.