Playing Discs - Sony AVD-S10 Operating Instructions Manual

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD,
some operations may be different or
restricted.
Refer to the operating instructions supplied
with your disc.
STANDBY
indicator
POWER
OPEN/
CLOSE
H
1
Turn on your TV.
2
Switch the input selector on the TV
to this receiver.
3
Press POWER on the receiver.
The receiver enters standby mode and
the STANDBY indicator lights up in
red.
GB
30
A H x
Adjust the volume
Connect
headphones
[/1
x
4
Press A on the receiver or OPEN/
CLOSE on the remote, and place a
disc on the disc tray.
The receiver automatically turns on
and the STANDBY indicator turns off.
With the playback side facing down
PHONES 5
PHONES
Press H.
The disc tray closes, and the receiver
starts playback (continuous play).
Adjust the volume on the receiver.
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions
on the menu. DVD (page 32), VIDEO CD
(page 33).
To turn on the receiver
Press POWER on the receiver. The receiver
enters standby mode and the STANDBY
indicator lights up in red. Press [/1 on the
remote. The receiver turns on and the
STANDBY indicator turns off. In standby
mode, you can also turn on the receiver by
pressing A on the receiver or by pressing
H.
To turn off the receiver
Press [/1 on the remote. The receiver
enters standby mode and the STANDBY
indicator lights up in red. To turn off the
receiver completely, press POWER on the
receiver. While playing a disc, do not turn
off the receiver by pressing POWER. Doing
so may cancel the menu settings. When you
turn off the receiver, first press x to stop
playback and then press [/1 on the remote.