Calling While Playing Back Music - Sony DRC-BT30 Operating Instructions Manual

Calling while playing back music

The Bluetooth connection using HFP
or HSP as well as A2DP is necessary to
make a call while playing back music.
For example, to make a call using a
Bluetooth mobile phone while listening
to music on a Bluetooth compatible
music player, this unit needs to be
connected to the mobile phone using
HFP or HSP.
Make a Bluetooth connection
between this unit and the
device in use following the
procedures outlined below.
1
Make a Bluetooth connection
between this unit and the
mobile phone in use with HFP
or HSP following the
procedures outlined in
"Calling" (page 17).

Operate the Bluetooth device
(music player or mobile phone)
used for playing the music to
make a Bluetooth connection to
this unit using ADP.
To make a call while playing
back music
1
Press the
playing back music (page 1),
or operate your Bluetooth
mobile phone to make a
telephone call.
If no dialling tone is heard on this
unit, press and hold the
for about 2 seconds.
0
GB
button while
button
To receive a call while playing
back music
When an incoming call arrives, the
music pauses and the ring tone is
heard from this unit.
1
Press the
After finishing the call, press the
button. This unit is switched back
to music playback.
When no ring tone is heard
even if an incoming call arrives
1
Stop music playback.

When ringing, press the
button and talk.
button and talk.