Step 3: Tv Hookups - Sony AVD-S10 Operating Instructions Manual

Step 3: TV Hookups

Connect a SCART (EURO AV) cord (supplied) and mains lead in the order (1 – 3) shown
below. Be sure to connect the SCART (EURO AV) cord to the T EURO AV OUTPUT (TO
TV) jack on the receiver. Also, be sure to connect the mains lead last.
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the TV.
• The receiver cannot output the S video signal.
• The receiver cannot output the audio signal of the connected TV. When you listen to the audio signal of the TV
by using the connected speakers, input the audio signal of the TV from the t EURO AV INPUT (FROM
VIDEO) jack.
Super Audio CD/DVD receiver
AM
COAXIAL
L
OUT IN
FM
R
75Ω
ANT
ANALOG DIGITAL OUT DIGITAL IN
1 SCART (EURO AV) cord
(supplied)
When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video
or RGB signals. If the TV conforms to S video, change the input mode of the TV to RGB
signals. Refer to the operating instructions supplied with the TV to be connected. Also, when
you set "LINE" to "VIDEO" or "RGB" (same as TV) under "CUSTOM SETUP" in the Setup
Display (page 67), use a SCART (EURO AV) cord that conforms to each signal.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 66.
EURO AV SPEAKERS
FRONT
R
+
AUDIO
OPTICAL OPTICAL
OUT
(CD ONLY) 1 2
–
R
SUB
WOOFER
To T EURO AV OUTPUT (TO TV) jack
TV
IMPEDANCE USE 6–16Ω
CENTER SURROUND
L R L
+ + +
– – –
L R L
3 a mains lead
To SCART (EURO AV) input
2 a mains lead
21
GB