Tv Only - Sony SAT-A4 Operating Instructions Manual

TV Only
TV With RF Connector Only
Your VHF/UHF IN jack may be labeled as
RF IN.
Refer to the illustration below.
1
Connect the RG-6 cable from the Satellite Antenna's LNB to the
Digital Satellite Receiver's SATELLITE IN jack.
2 Connect the Digital Satellite Receiver's VHF(SAT)/UHF OUT jack
to the TV's VHF/UHF IN jack.
Note
A VHF/UHF connection does not provide stereo sound. To receive stereo
sound, you must use an A/V connection (described on page 13).
3 Connect one end of the telephone line cord to the Digital Satellite
Receiver's TEL LINE jack. Connect the other end to your home's
modular telephone outlet. Do not connect to a "wireless"
telephone extension. Since these devices typically do not support
high data rates, connecting to one may result in very slow
operation or may even prevent connection with your program
provider.
4
Connect one end of the AC power cord to the Digital Satellite
R " '
ecelver s AC IN jack. Connect the plug end to an AC outlet.
Digital Satellite Receiver
2
1
Coaxial
RG-6 Cable Cable
from LNB
SAT-A4 receiver is pictured, but connections
are identical for SAT-B3.
3
Telephone
Line
4
AC Cord
12
Optional Connections
Q If you have a cable input, cable box, or a terrestrial TV antenna,
connect it to the Digital Satellite Receiver's VHF/UHF IN jack.
Q You can also connect the Digital Satellite Receiver to your audio
receiver's AUDIO IN jacks using audio cables.