Environmental Specifications - Quantum DLT V4 User Manual

Environmental Specifications

Typical cycle time
Average load time to
BOT (after placing
cartridge in drive)
Average unload time
(from BOT)
Temperature Range (Dry Bulb)
Operating
Nonoperating
Temperature Variation
Operating
Nonoperating
Humidity
Operating
Nonoperating
Gradient
Wet Bulb
Operating
Nonoperating
Altitude
Operating
Nonoperating
Environmental Specifications
Quantum SuperLoader 3 User's Guide Addendum
All Drive Types
< 40 seconds. One cycle consists of moving a
cartridge from the tape drive to a magazine slot,
selecting another magazine slot, and then
moving the cartridge back to the tape drive. It
does not include the time that the tape drive
takes to unload or load/calibrate.
< 70 seconds
VS1 =
= 22 seconds (from BOT, no brush), 61
VS1
seconds (from BOT, brush)
+10º to +35ºC
- 40ºC to +65ºC
10ºC per hour
20ºC per hour
20% to 80% noncondensing
10% to 90% noncondensing
10% per hour without condensation
26ºC max
29ºC max
-153 m to 3048 m
-153 m to 12192 m
Document 81-81529-01, A01
December 2005
0
5