Quantum DLT 4000 Product Manual page 62

Configuring and Operating the DLT4000 Basic Tape Drive
Table 3-2 Determining the Drive's Operating Condition (cont'd)
Label
Indicator (Left Front Panel)
2.6
6.0
10.0/15.0
20.0
Compress
Density Override
All four right-side
or all left-side
indicators
3-16 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
Color State
Yellow On
Blinking
Yellow On
Blinking
Yellow On (default)
Blinking
Yellow On (default)
Blinking
Yellow On
Off
Yellow On
Off (default)
Blinking
Blinking
Operating Condition
Tape is recorded in 2.6 GB
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Tape is recorded in 6.0 GB
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Tape is recorded in 10.0/15.0
GB format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Tape is recorded in 20.0 GB
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Compression mode is enabled.
(Compression can be done in
10.0/20.0 GB density only.)
Compression mode is disabled.
You selected a density from the
front panel.
Density to be selected by the
host (automatic).
You are in density selection
mode.
A POST error occurred.