Quantum DLT 4000 Product Manual page 340

Sense Key Information
24 8D Bad drive/server image EDC
24 8E Invalid personality for code update
24 8F Bad controller image EDC
25 00 Illegal LUN
26 00 Parameter List Error, invalid field
26 01 Parameter List Error, parameter not supported
26 02 Parameter List Error, parameter value invalid
39 00 Saving parameters not supported
3B 0D Media Destination Element Full
3B 0E Media Source Element Empty
3D 00 Invalid Bits in ID Message
53 02 Media Removal Prevented
82 00 Not allowed if not at BOT
Unit Attention (6):
28 00 Not Ready To Ready Transition
29 00 Reset occurred
2A 01 Mode Parameters changed
2A 02 Log Parameters changed
3F 01 Microcode has been changed
5B 01 Log Threshold condition met
Data Protected (7):
27 80 Hardware Write Protect
27 82 Data Safety Write Protect
Blank Check (8):
00 05 EOD Encountered
Command Aborted (Bh):
43 00 Message error
44 82 Command Complete sequence failure
45 00 Select/Reselect Failure
C-4 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem