Quantum DLT 4000 Product Manual page 353

A
AC Power Cord, A-8
Acoustic noise emissions, A-24
Altitude
environmental specifications, A-15
ATTENTION signal responses, 8-4
Automatic mode, 5-5, 5-7
B
BACKUP command
Automatic mode, 5-7
Beeper, 3-12
Bugcheck Packets, D-2
BUS FREE, 8-6
BUS PARITY ERRORS, 8-6
Bus termination, 2-8
Button functions, conditions, 6-2
Button operation
conditions for, 6-3
Buttons, operating, 4-12
C
Cables
SCSI signal cable, 2-7
tabletop, connecting, 2-7
Capacity, 1-2
Cartridge, 3-17, 4-24
acclimatization, 3-26
before loading, 3-19, 4-27, 5-21
checking the tape leader, 6-4
ejection, 5-20
guidelines for care, 3-26
handling, 3-26
inserting into magazine, 4-27, 5-21
labeling, 3-26
loading, 3-20, 4-31, 5-18
positioning the write-protect switch, 3-17
preserving, 3-26
removing, 4-29
removing from the magazine, 5-24
Cartridge insert/release handle
Cleaning tape cartridge
Code Update (CUP) Status Packet, D-8
Combined header and data mode, 8-95
Commands
Compaction, 1-2
Compatibility, 1-3
Conducted emissions, A-22
Conducted susceptibility, A-23
Configuration
Connecting the SCSI Signal, 4-8
Connection
Control byte, 8-14
Control mode, 8-82
Control Mode Page, 8-56
Controls
D
Data cache, 8-4
Data compression, 8-58, 8-84
Data mode, 8-95
Data protection, 3-19, 4-25
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem-1
storage, 3-26
unloading, 3-24, 4-32, 5-19
using a, 3-22
using cleaning tape cartridge, 3-23
write-protect switch, 4-25, 5-21
when to operate, 3-12
when to use, 3-23, 4-33
sequential-access device commands, 8-15
Supported SCSI-2 medium changer device,
8-131
DLT4000 Tabletop, 2-5
DLT4500 mini-library, 4-3
DLT4700 Mini-Library, 5-2
power cord, 2-8
cartridge insert/release handle, 2-3, 3-12
description, 2-3, 3-12
diagram, 3-11
front panel, 2-3, 3-11
Unload button, 3-12
Index