Configuring and Operating the DLT4700 Mini-Library
Button/Indicator
Density Override
2.6
6.0
10.0/15.0
20.0
5-14 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
Table 5-2 DLT4700 Operator Control Panel (Cont'd)
Color
Function
Yellow
Indicates tape drive activity as follows:
Yellow
Indicates tape drive activity as follows:
Yellow
Indicates tape drive activity as follows:
Yellow
Indicates tape drive activity as follows:
Yellow
Indicates tape drive activity as follows:
On steady you selected a density from the
front panel.
Off (default) density to be selected by the
host (automatic).
Blinking you are in density selection
mode.
On steady tape is recorded in 2.6 GB
format.
Blinking tape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape III).
On steady tape is recorded in 6.0 GB
format.
Blinking tape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape III).
On steady tape is recorded in 10.0/15.0 GB
format.
Blinking tape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape III for 10.0
format and only in DLTtape IIIxt for 15.0
format).
On steady tape is recorded in 20.0 GB
format.
Blinking tape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape IV).