Quantum DLT 4000 Product Manual page 119

Table 5-2 DLT4700 Operator Control Panel (Cont'd)
Button/Indicator Color
Write Protected Orang
indicator e
Tape In Use Yellow
indicator
Use Cleaning Orang
Tape indicator e
Magazine Fault Red
indicator
Loader Fault Red
indicator
Current Slot Green
indicators 0-6
Density Select Green
Configuring and Operating the DLT4700 Mini-Library
Function
Indicates the cartridge in the drive is write-
protected by one of these methods:
The write-protect switch is set to the write-
protect position
Host software write-protect qualifiers
When off, indicates that the cartridge in the
drive is write-enabled.
Indicates tape drive activity as follows:
Slow blinking indicates tape is rewinding
Rapid blinking indicates tape is reading or
writing
When on steadily, indicates a cartridge is in
the drive and the tape is not moving
When off, indicates no cartridge is in the
drive
The read/write head needs cleaning. See Chapter
3.
Indicates a magazine failure.
Indicates a loader transfer assembly error or
drive error.
Identifies the current slot (see Slot Select button).
Each current slot indicator blinks when its
corresponding cartridge moves to or from the
drive. Also used with the Magazine Fault or
Loader Fault indicator to show the type of fault
(Section 6.6.1 and Section 6.6.2.).
Indicates the user can choose a density on the
OCP
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 5-13