Scsi Id Connector Pins - Quantum DLT 2000 Product Manual

Figure 3-2 shows what the pins on the SCSI ID connector represent.
Remote ID
Present
Figure 3-2 SCSI ID Connector Pins
_________________________ Note _____________________________
A jumper must always be placed on the Remote ID Present
position (Figure 3-2) for the host to recognize any ID
selection on this connector.
___________________________________________________________
Configuring and Operating the DLT2000 Basic Tape Drive
Disable
Parity
DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem 3-3
ID Pins
LKG-9295-94F